For pressurizing the lubricating oil system of marine engines and pumping out lubricating oil drums when no 230 volt supply is available.

type: GM
colour: green with aluminium
special feature: inbuilt overflow valve
pump type: gearwheel pump, limited self-priming
impeller type: steel gearwheels
motor type: dust and waterproof brush motor
fuse: NOT inbuilt
shaft seal: lip seal
materials: impeller : steel gearwheels
: pump housing : aluminium
: pump shaft : stainless steel
liquids: clean lubricating oil and neutral low viscosity liquids with lubricating properties
voltage: 24 V DC

running time: 25 minutes, may NOT run continuously
viscosity: has a very big effect on capacity, maximum 800 centistokes or 110 Engler approx. equal to SAE 20 at 0°C
capacities: measured with water
no head: 1,200 litres per hour
5 metres head: 1,125 litres per hour
10 metres head: 1,050 litres per hour
15 metres head: 960 litres per hour
discharge head: 20 metres maximum
suction head: depends on viscosity
particle size: zero
connections: suction : 1" internal thread
: discharge : 3/4" internal thread
dimensions: lxwxh = 300 x 150 x 210 mm
weight: 10.0 kg
amperage: 16.0 A
shaft power: 0.2 kW, 0.26 hp, 6200 rpm
cable: 5 metre without plug, an inbuilt switch on the pump